Wood Bed Lifter Set Of Four - 2 1/2 Lift for Rectangle 2 x 3 Bed Post

Description

Furniture Lifter / Bed Riser (Package of Four)
Lift Height 2 1/2 Inches (or select option for up to 3 1/2 inch lift height)
Recessed Area fits 2 x 3 Inch Rectangle Bed Posts
(recessed area is 2 1/4 x 3 1/4 inches)
Made in USA by Steve's Gift Shoppe
Choice of finishes available
These are extremely strong bed lifters. Douglas fir solid core, and strong enough to hold thousands of pounds per bed lifter. (You can check with a structural engineer on that one).
Compression Strength of Douglas fir is 1300 to 1700 pounds per square inch.
Additional Specifications
Recessed Area Depth : 1/2 inch
Outside surfaces sanded and smoothed
Weight: Each lifter weighs about 1 pound
FINISH OPTIONS: No finish, or dark wood stain finish, or painted (you specify the color)
Stained Finish: All stained finishes will have three coats of shellac as a protective over-coat for a slightly glossy finish.
Painted Finish: You select the color in a Krylon brand (or common brand paint) and please select a color that we can easily obtain at Home Depot, Ace hardware store, or Wal Mart).
Caution: This product should be used with furniture legs that will fit within the recessed area and not create a ''tight'' fit.
Caution: Use only in the upright position and do not use outside edges of this product for lifting purposes.  Upright position is defined as recessed area is up, and flat surface of opposite side is to the floor.
Caution: If using this product on a wood floor or a laminate flooring, it is advised to affix a protective felt or rubber pad under the lifters to protect from any damage to the flooring.
Shipping: Shipment on or about the third day after you order. Each set of lifters is made at the time of your purchase and takes two or three days to make.
PLEASE PLEASE !! MEASURE YOUR FURNITURE LEGS TWICE TO MAKE CERTAIN YOU ARE ORDERING THE CORRECT SIZE LIFTER.