Virulite CS Cold Sore  The Only Device Approved by the FDA for Cold Sores

Description

Virulite CS Cold Sore The Only Device Approved by the FDA for Cold Sores. Condition is "New with box". Shipped with USPS Parcel Select Ground.
Treatment with the Virulite Cold Sore Machine takes just 3 minutes and usually just two treatments, approximately twelve hours apart, gets results (read how to use the Virulite Cold Sore Machine).
Imagine, being able to treat your cold sores without the inconvenience and embarrassment of messy ointments!
The Virulite Cold Sore Machine was developed by a British practising MD after ten years of clinical research, and has been sold in Europe for almost a decade with tens of thousands of satisfied customers.
Based on the safety & proven efficacy of the Virulite Cold Sore Machine, the FDA for the first time
has made the product the First Ever cleared device in history by the FDA for the treatment of cold sores!
It is a safe and highly effective cold sore treatment that will pay for itself many times over!
How does Virulite work?
Virulite is a new therapeutic technology developed by researchers who found a particular narrow waveband of light effects cold sore healing times. The invisible infrared light in Virulite has been shown to enhance the local immune response to the cold sore infection. If you use Virulite during the tingling phase, the device may even help prevent attack. If your cold sore has already erupted, Virulite will help speed up the healing time. Instructions: Use Virulite as soon as you feel your cold sore symptoms beginning (the tingling phase) and repeat again 12 hours later. Continue to use twice a day for the next 2 days. For more persistent attacks, the treatment can be carried out more frequently without adverse effects. How to Use:
1. Press the power button.
2. Place the device over the cold sore.
3. Hold in position until you hear the audible beep.
4. The device switches off at the end of a 3-minute treatment cycle.
FAQs
Is it dangerous to use the device more often than the treatment protocol?
We do not recommend using the device more often than specified in the Instructions for Use pamphlet that comes with the device.
If I use the device more often, will it heal my cold sore faster?
We tested the treatment protocol in multiply clinical trials. However, we don’t have clinical data to know whether more frequent treatment cycles would heal a cold sore even faster.
How do I clean the device?
Specific instructions for cleaning are detailed in the Instructions for Use pamphlet that comes with the device and the cleaning process was developed to mitigate any possible risk of spreading the cold sore virus infection.
How do I use the device?
The instructions for the device are clearly described in the Instructions for Use pamphlet that comes with the device.
How do I store the device?
When not being used, we recommend storing the device in a dry, dust free environment and removing the 9 volt battery.
Can I share the device with my family or friends?
We do not recommend sharing the device.
How do I know when to change the battery?
The device checks for the remaining charge of the 9 volt battery – if there isn't enough power to treat your cold sore, the unit will not power up. If this is the case just insert a new 9 volt battery and continue using as normal.
When the device isn't being used, the 9 volt battery should be removed and stored separately.
Can I change the battery?
Yes the battery can be changed very easily – the instructions are included in the leaflet that came with your device.
When the device isn’t being used, the 9 volt battery should be removed and stored separately.
I cannot see the light – is my device broken?
The light omitted by the ViruLite device is a spectrum of light that is invisible to the human eye.
However, built into the ViruLite device is a sensor that repeatedly checks the treatment light is pulsing correctly, to ensure your cold sore is being treated.
How do I know the Virulite device will work for me?
The product has been tested in multiply double blind clinical trials and obtained clearance by the FDA for home use
Troubleshooting
When the power button is depressed, there are 6 audible beeps, 2 power-up beeps, followed by 2 high, 2 low frequency beeps. The green light DOES NOT flash continuously. Unit shuts off.
Possible cause:
LEDs faulty,
Action required:
Device failure, return the device to Virudist LTD.
Unit does not beep when power button is depressed.
Possible cause:
No power,
Action required:
Check the battery. Replace the 9 volt alkaline battery.
Unit beeps, green light flashes continuously, but there is no audible beep to indicate the end of a treatment session.
Possible cause:
Battery low,
Action required:
Replace the 9 volt alkaline battery. Repeat the treatment.
Unit beeps, green light flashes once. Green light does not flash continuously.
Possible cause:
Battery low,
Action required:
Replace the 9 volt alkaline battery. Repeat the treatment.
The 9 volt alkaline battery should be removed and stored separately when the device is not being used.
Product Logo / Branding:
All images shown are for illustration purposes only & actual product & branding may vary due to product enhancement.
User Guide
Treatment with ViruLite is commenced at the first symptoms of a cold sore 3 times a day with 4 hours in between treatment for 2 consecutive days. For more persistent attacks the treatment can be carried out more frequently without any adverse effect.
The ViruLite Cold Sore Treatment device is intended for personal use only. It should not be shared even amongst members of the same family.
The plastics used in the manufacture of the device have been rigorously tested and are suitable to be used in contact with the skin.
Figure 2
Figure 3
How to Use:
Clean the rim of the device (the area that is in contact with your skin) with an antiseptic wipe or a tissue dampened with a little diluted antiseptic before use. DO NOT immerse the ViruLite in water.
Press the power button (Figure 2) to activate the ViruLite. You will hear an audible beep and the light on the button will flash green. The device is now in the active treatment mode. PLEASE NOTE: the light emitting diodes in the treatment cavity produce therapeutic light that is invisible to the human eye.
Using a mirror, place the rim of the treatment cavity in contact with the skin, around the cold sore (Figure 3).
Hold the ViruLite unit in place until you hear the audible beep.
Once you hear the audible beep remove the ViruLite unit from the treatment area. The device automatically switches off at theend of a 3-minute treatment cycle.
Clean the rim of the device (the area that is in contact with your skin) with an antiseptic wipe or a tissue dampened with a little diluted antiseptic. DO NOT immerse the ViruLite in water.
The exterior of the ViruLite device may be cleaned by wiping itwith a damp (not wet) cloth or an isopropyl alcohol wipe. Please refrain from using any other cleansing products as these may damage the plastic casing.
When the ViruLite device isn’t being used, the 9 volt alkaline battery should be removed and stored separately.
Battery replacement:
The ViruLite Cold Sore Treatment device comes with a 9 volt alkaline battery and it is recommended that when replacing the battery a brand new 9 volt alkaline battery is used.
To fit the battery or replace the battery please follow the instructions below;
Figure 4
Figure 5
Remove the battery cover by pinching on the sides of the battery cover and pulling away the lower cover (Figure 4).
Slide the battery into the battery compartment (Figure 5), ensuring that the polarities of the battery match with those printed on the ViruLite casing.
Snap back into place the lower cover. If the battery cover will not snap back on, DO NOT force the cover. Remove and recheck the polarities of the battery match those printed on the ViruLite casing.
Batteries should be disposed of at a battery collection facility to minimise hazards to health and the environment and to enable materials to be recycled.