Solid Wood Bed Lifter Desk Riser Set of 8 For 2 x 2 and 2 x 3 3/8 Furniture Legs

Description

Special Order Item
Furniture Lifter / Bed Riser (Package of Eight )
Lift Height = Select Lift Height Option
This set includes the following:
Quantity four lifters made for 2 x 2 inch furniture legs
Quantity four lifters made for 2 x 3 3/8 inch furniture legs
Recessed area will include 1/4 inch clearance,  which means the recessed area that the furniture leg fits into will be 2 1/4 x 2 1/4 inches and the rectangle (longer) lifters will have a recessed area of 2 1/4 x 3 5/8 inches.
No finish is applied on this special order listing. Outside surfaces will be sanded smooth and corners and edges will be rounded to remove sharp edges.
Made in USA by Steve's Gift Shoppe
Material: Douglas fir solid core, Douglas fir exterior
Depth of Recessed Area: About 5/8 inch
These are extremely strong bed lifters. Douglas fir solid core, and strong enough to hold thousands of pounds per bed lifter. (Check with a structural engineer on that one).
Compression Strength of Douglas fir is 1300 to 1700 pounds per square inch.
Additional Specifications
Outside surfaces sanded and smoothed, corners and edges are rounded
Weight: Each lifter weighs about 12 ounces
Caution: This product should be used with furniture legs that will fit within the recessed area and not create a ''tight'' fit.
Caution: Use only in the upright position and do not use outside edges of this product for lifting purposes.  Upright position is defined as recessed area is up, and flat surface of opposite side is to the floor.
Caution: If using this product on a wood floor or a laminate flooring, it is advised to affix a protective felt or rubber pad under the lifters to protect from any damage to the flooring.