-40%

Solid Wood Bed Lifter Desk Riser Set of 4 For 3 x 3 Furniture Leg + Felt Lining

$ 18.45

Availability: 76 in stock
  • All returns accepted: ReturnsNotAccepted
  • Condition: New
  • Country/Region of Manufacture: United States
  • Type: Bed Risers
  • Model: BL3F
  • Brand: Steve's Gift Shoppe
  • MPN: BL3F

    Description

    Furniture Lifter / Bed Riser
    Package of Four With Protective Felt-Lined Bottom
    IF YOU NEED A SET OF FIVE LIFTERS, please see eBay item
    373417200740
    Lift Height Option - Available in 1, 1.5, 2, or 3-Inch Lift
    Made for 3 x 3 Inch Furniture Legs (Recessed area is 3.25 x 3.25 inches)
    Made in USA by Steve's Gift Shoppe
    Choice of finishes available
    Material: Cedar exterior, Douglas fir solid core
    Outside dimensions: Approximately 4.25 x 4.25 Length x Width
    Depth of Recessed Area: Approximately 5/8 inch
    These are extremely strong bed lifters. Douglas fir solid core, and strong enough to hold thousands of pounds per bed lifter. (Check with a structural engineer on that one).
    Compression Strength of Douglas fir is 1300 to 1700 pounds per square inch.
    Additional Specifications
    Outside surfaces sanded and smoothed, corners and edges are rounded
    Comes with Protective Felt Lined Bottom for Hardwood or Laminate flooring
    Weight: Each lifter weighs about 8 ounces
    FINISH OPTIONS: Clear shellac finish, or dark wood stain finish with clear coat of shellac, or painted (you specify the color)
    -- Clear Shellac Finish: Two coats of shellac, which will provide a golden/honey color and a slightly glossy surface.
    -- Stained Finish: All stained finishes will have two coats of shellac as a protective over-coat for a slightly glossy surface.
    -- Painted Finish: You select the color in a Krylon brand (or common brand paint) and please select a color that we can easily obtain at Home Depot, Ace hardware store, or Wal Mart).
    Caution: This product should be used with furniture legs that will fit within the recessed area and not create a ''tight'' fit.
    Caution: Use only in the upright position and do not use outside edges of this product for lifting purposes.  Upright position is defined as recessed area is up, and flat surface of opposite side is to the floor.
    Caution: If using this product on a wood floor or a laminate flooring, it is advised to affix a protective felt or rubber pad under the lifters to protect from any damage to the flooring.