IST Rubber High Pressure Gauge Hose with Screw On Valve Fittings

Description

Never let a dive be interrupted by a too short hose, keep an assortment of hose lengths on hand to tackle any situation.
o
High pressure tank hose, connects cylinder to gauge console
o
Rubber construction for maximum durability
o
Male end screws on to the first stage high pressure (HP) port
o
Female end screws on to the submersible pressure gauge (SPG) / console
o
Available in varying lengths, up to 40 inch (101.6 cm)
The IST Rubber High Pressure Gauge Hose with Screw On Valve Fittings is for divers who insist on the rugged durability found only in rubber.
These hoses are virtually indestructible and with proper use and maintenance, can deliver decades of faultless performance.
7/16 inch (11.11 mm) male connector screws on to the first stage high pressure (HP) port.
7/16 inch (11.11 mm) female connector screws on to the submersible pressure gauge (SPG) / console.
Maximum working pressure is at 300BAR (4350psi).
Available in varying lengths to suit either technical or recreational diving needs, all in black.
***Please note that the impact of the global pandemic has caused restrictions that continue to limit the ability of our parcel carriers to meet their normal expectations. Therefore, it may take our carriers a few extra days for standard shipments to arrive. ***