Highland by XS Scuba Miflex Pressure Gauge/Compass Combo

Description

Highland by XS Scuba Miflex Pressure Gauge/Compass Combo
Looking for a durable pressure gauge compass combo console? Console is perfect choice for use with a wrist mounted dive computer or depth gauge. The Highland by XS Scuba can fit the bill! Console combo has a durable scratch-resistant pressure gauge that is triple nickel-plated brass cased with tempered glass lens. Gauge reads from 0 to 5,000 psi, has a simple unobstructed white-faced dial for easy reading. The air-spool is equipped with Viton O-rings for oxygen compatibility out of the box. Gauge has a built-in over-pressure relief valve for added safety and the gauge face is luminescent for easy reading in low light or night diving conditions. Gauge has a wide 270° degree sweep for accuracy. Gauge is manufactured in Italy. The pressure gauge is equipped with a 32" (81.3 cm) Miflex carbon HD braided outer layer, 7/16" threaded high pressure (HP) hose. The Miflex hose is 35% thinner and 50% lighter than traditional rubber HP hoses.The compass has a highly accurate movement with an allowable tilt of up to 22° degrees. The compass can be used for top or side reading with the side reading providing gun-sight accuracy when navigating. This instrument is highly accurate and is calibrated for the northern hemisphere. The compass is liquid filled for a quick and responsive movement. A ratchet bezel with numerical compass headings in 30° increments and 10° indicator markings for calculating compass headings. Bezel has twin heading indicators for alignment of compass course and a lubber line across the compass face. Compass card is luminescent for low light and night diving conditions. Pressure Gauge Chromed brass housing with Lexan lens (Thin-Line SPG) 0 to 5000 psi - 0 to 400 bar Luminescent gauge face Airspool with Viton o-rings Compass Highly accurate movement Tilt of up to 18 degrees Top and side reading Large ratcheting bezel Luminescent face Northern hemisphere Miflex Hose 32” (81.2 cm) Miflex Carbon HD braided outer layer Manufactured in Italy Attachment Clips Two loops for attachment
Highland by XS Scuba Miflex Pressure Gauge/Compass Combo
Looking for a durable pressure gauge compass combo console?
Console is perfect choice for use with a wrist mounted dive computer or depth gauge. The Highland by XS Scuba can fit the bill! Console combo has a durable scratch-resistant pressure gauge that is triple nickel-plated brass cased with tempered glass lens. Gauge reads from 0 to 5,000 psi, has a simple unobstructed white-faced dial for easy reading. The air-spool is equipped with Viton O-rings for oxygen compatibility out of the box. Gauge has a built-in over-pressure relief valve for added safety and the gauge face is luminescent for easy reading in low light or night diving conditions. Gauge has a wide 270° degree sweep for accuracy. Gauge is manufactured in Italy. The pressure gauge is equipped with a 32" (81.3 cm) Miflex carbon HD braided outer layer, 7/16" threaded high pressure (HP) hose. The Miflex hose is 35% thinner and 50% lighter than traditional rubber HP hoses.
The compass has a highly accurate movement with an allowable tilt of up to 22° degrees. The compass can be uséd for top or side reading with the side reading providing gun-sight accuracy when navigating. This instrument is highly accurate and is calibrated for the northern hemisphere. The compass is liquid filled for a quick and responsive movement. A ratchet bezel with numerical compass headings in 30° increments and 10° indicator markings for calculating compass headings. Bezel has twin heading indicators for alignment of compass course and a lubber line across the compass face. Compass card is luminescent for low light and night diving conditions.
Pressure Gauge
Chromed brass housing with Lexan lens (Thin-Line SPG)
0 to 5000 psi - 0 to 400 bar
Luminescent gauge face
Airspool with Viton o-rings
Compass
Highly accurate movement
Tilt of up to 18 degrees
Top and side reading
Large ratcheting bezel
Luminescent face
Northern hemisphere
Miflex Hose
32” (81.2 cm) Miflex Carbon HD braided outer layer
Manufactured in Italy
Attachment Clips
Two loops for attachment
×
Buy now and save!
Tell a friend
Watch now
Postage info
Click the Postage tab above the listing description for more info
FREE Postage
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Additional Information
No additional information at this time
Ask seller a question
You might also like
Riffe Replacement Flopper and Rivets
Marseilles Weight Belt
Cressi Nano Mask
Cressi Gara Modular Foot Pocket Assembly Kit
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© Lost Winds Dive Shop
Postage
Shipping is FREE for this item
Payment
Accepted Payment Methods
PayPal
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
Buyer will pay for return shipping.
eBay integration
by