Goodwood Audio TX Underfacer

Description

The TX Underfacer is like The TX Interfacer but designed to go under an angled pedal board.  Use Underfacer to take care of all your input, muting, tuning, summing, isolating...
SPECIFICATIONS
TX Underfacer:
Designed to fit under an angled pedalboard, preserving pedalboard real-estate.
Handles input, muting, tuning, summing, isolating, and phase correction needs.
Master Mute:
Mute signal before reaching amps using mute pushbutton on The TX Underfacer.
Remote control of master mute available with RMT.
Summing:
Two summing modes: Stereo Sum and Split Sum.
Stereo Sum:
Left and right inputs merged, sending the same signal to both left and right outputs.
Split Sum:
Right input ignored, left input split to both left and right outputs.
RMT:
Control summing mode and master mute with RMT.
Hold foot switch for more than 2 seconds to switch sum state.
Tap foot switch to mute/un-mute signal.
Ground Lift & Phase Correction:
Ground lift and phase correction available for running multiple amps.
Ground Lift:
Eliminate ground loop by lifting ground on one amp.
Phase Correction:
Correct phase mismatch between amps.
Input:
Buffered input preserves tone before reaching first pedal.
Always-on tuner out included.
Specifications:
Power Requirement: 9V DC center negative plug (100mA)
Dimensions: 100mm (L) x 118mm (W) x 34mm (H)
Input Impedance (B. In, L and R inputs): 1 Megohm
Output Impedance (B. Out, Tuner Out, L and R outputs): 500 ohms