For INFINITI Q50 2014-2018 Qty(2) Trunk Lift Supports Struts Shocks Gas Spring

Description

Fits Vehicles of the Following Years and Make:
2014-2017 Infiniti Q50 trunk lift support（W/ Out Spoiler）
Item Description:
Vehicle Location : Trunk
Set Quantity: 2 Pcs
Extended Length [in] : 11.38"
Compressed Length [in] : 8.01"
Patented Multi-Lobe Seal makes gas spring more tolerant to vibration and temperature extremes
Twin Tube internal construction-Premium gas-charged cylinders
Direct fit,Ensures easy installation and precise operation
Individually tested for performance and reliability
Brand new and warranty offered!!
How to Install :
For INFINITI Q50 2014-2018 Qty(2) Trunk Lift Supports Struts Shocks Gas Spring
Fits Vehicles of the Following Years and Make:
2014-2017 Infiniti Q50 trunk lift support（W/ Out Spoiler）
Item Description:
Vehicle Location :
Trunk
Set Quantity:
2 Pcs
Extended Length [in] :
11.38
"
Compressed Length [in] :
8.01
"
Patented Multi-Lobe Seal makes gas spring more tolerant to vibration and temperature extremes
Twin Tube internal construction-Premium gas
-
charged cylinders
Direct fit,Ensures easy installation and precise operation
Individually tested for performance and reliability
Brand new and warranty offered!!
How to Install :
Important Notes about Lift Supports :
Use Safety stands whenever a procedure requires you under the vehicle or supports. It is best for two people to assist in the replacement and one to help to avoid p"ing when replacing.
Before removing the old lift support,inspect the end connections and compare them to the units on your vehicle to make sure that they are the same As well as the extended Length.
Remove the old support from the vehicle by placing a small flat headed screw driver under the U shaped band on the ends of the support. Slowly turn the screw driver and it will lift up on the band approx.1/8",then pull the support away from the vehicle and it will release.
Lift Supports need to be installed fully 4.extended. In most cases you just can't compress them unless they are on the vehicle.
The support rod piston rod must be installed in a downward position, not upside down, so as to reduce friction and ensure the best damping quality and cushioning function.
The hydraulic support bar should not be subjected to tilt force or lateral force during work. It should not be used as a handrail.
If you have any issues during the installation PLEASE contact us. Never force a support.
Item Specifics
Brand
autopartsclub2018
Manufacturer Part Number
AP116612C01
Warranty
1 Year
Placement on Vehicle
Left,Right,Rear
Installation position
Trunk
Other Part Number
6802,844304GA2A,84430-4GA2A
Extended Length
11.38"
Compressed Length
8.01"
Material
Steel
Kit or Single Part
Single
Modified Item
NO
Superseded Part Number
6802,844304GA2A,84430-4GA2AStrut Gas Spring Shock
Interchange Part Number
6802,844304GA2A,84430-4GA2A
Type
Struts
Fitment Type
Direct Replacement
Custom Bundle
Yes
Mounting Hardware Included
No
Force Newtons
445N
Superseded Part Number
6802,844304GA2A,84430-4GA2AStrut Gas Spring Shock
Interchange Part Number
6802,844304GA2A,84430-4GA2A
Type
Struts
Fitment Type
Direct Replacement
Custom Bundle
Yes
Mounting Hardware Included
No
Mounting Hardware Included
No
Payment
We accept paypal only
We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address!
Shipping
1. Items will be shipped within 24 hours after getting your verified payment.
US Storage& UNITED STATES by fast shipping.We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors.Please feel free to contact us if you haven't receive the item after the estimated shipping tim
Returns
1.Defective products can be exchanged or returned for full price refund within 30days after you receive the item.
2.Any returning or exchanging item must be in new condition and cannot be tempered.
3. Buyers are responsible to pay the return shipping fee or exchange shipping fee.
4.Please contact us by eBay email first before you return the item Every week we have new items put on sale , if the items you don't need now ,you also can often come to visit my store, maybe one day you can buy the items in our stores which you need.
Contact Us
We treat each buyer with a sincere heart, I believe our sincere service , excellent quality of goods will win your trust and support, you may contact us via message and we will reply to you within 24 hours from Monday to Saturday.(Excluding local holidays)
Every week we have new items put on sale , if the items you don't need now ,you also cam often come to visit my store, maybe one day you can buy the items in our stores which you need.
Hot Item
For Jeep Patriot Compass Chrysler Dodge 2.4L 2.0L 2007 2008-2017 Throttle Body
USD 49.19
For 2001-2006 GMC Yukon 13Pcs Front Upper Control Arms Idler Arm Tie Rods Kit
USD 135.79
Heavy Duty Coil Spring Compressor Strut Remover Installer Suspension Tool 2pc
USD 28.99
Rear Step Bumper for 2014-2018 Chevy Silverado GMC Sierra 1500 no Sensor Holes
USD 249.99
30 Amp RV Female Plug Replacement Receptacle Plug Male Power Cord Grip Handle
USD 9.89
Picture
For INFINITI Q50 2014-2018 Qty(2) Trunk Lift Supports Struts Shocks Gas Spring
Fits Vehicles of the Following Years and Make:
2014-2017 Infiniti Q50 trunk lift support（W/ Out Spoiler）
Item Description:
Vehicle Location :
Trunk
Set Quantity:
2 Pcs
Extended Length [in] :
11.38
"
Compressed Length [in] :
8.01
"
Patented Multi-Lobe Seal makes gas spring more tolerant to vibration and temperature extremes
Twin Tube internal construction-Premium gas
-
charged cylinders
Direct fit,Ensures easy installation and precise operation
Individually tested for performance and reliability
Brand new and warranty offered!!
How to Install :
Important Notes about Lift Supports :
Use Safety stands whenever a procedure requires you under the vehicle or supports. It is best for two people to assist in the replacement and one to help to avoid p"ing when replacing.
Before removing the old lift support,inspect the end connections and compare them to the units on your vehicle to make sure that they are the same As well as the extended Length.
Remove the old support from the vehicle by placing a small flat headed screw driver under the U shaped band on the ends of the support. Slowly turn the screw driver and it will lift up on the band approx.1/8",then pull the support away from the vehicle and it will release.
Lift Supports need to be installed fully 4.extended. In most cases you just can't compress them unless they are on the vehicle.
The support rod piston rod must be installed in a downward position, not upside down, so as to reduce friction and ensure the best damping quality and cushioning function.
The hydraulic support bar should not be subjected to tilt force or lateral force during work. It should not be used as a handrail.
If you have any issues during the installation PLEASE contact us. Never force a support.
Payment
Shipping
Returns
Contact Us
We accept paypal only
We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address!
1. Items will be shipped within 24 hours after getting your verified payment.
US Storage& UNITED STATES by fast shipping.We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors.Please feel free to contact us if you haven't receive the item after the estimated shipping tim
1.Defective products can be exchanged or returned for full price refund within 30days after you receive the item.
2.Any returning or exchanging item must be in new condition and cannot be tempered.
3. Buyers are responsible to pay the return shipping fee or exchange shipping fee.
4.Please contact us by eBay email first before you return the item Every week we have new items put on sale , if the items you don't need now ,you also can often come to visit my store, maybe one day you can buy the items in our stores which you need.
We treat each buyer with a sincere heart, I believe our sincere service , excellent quality of goods will win your trust and support, you may contact us via message and we will reply to you within 24 hours from Monday to Saturday.(Excluding local holidays)
Every week we have new items put on sale , if the items you don't need now ,you also cam often come to visit my store, maybe one day you can buy the items in our stores which you need.
All rights reserved.