-40%

Earthquaker Devices Rainbow Machine V2 Polyphonic Pitch Shifting Modulator Pedal

$ 120.91

Availability: 77 in stock
  • Brand: EarthQuaker Devices
  • To Fit: Acoustic Guitar, Lap & Pedal Steel Guitar, Acoustic Electric Guitar, Electric Guitar, Bass Guitar
  • Model: Rainbow Machine V2
  • MPN: RAINBOW MACHINE V2
  • Condition: New
  • UPC: 855755007237
  • Type: Guitar Effects Pedal
  • Analog/Digital: Digital

    Description

    ProAudioStar
    DJ GEAR
    INSTRUMENT GEAR
    LIVE SOUND
    RECORDING
    MICROPHONES
    HEADPHONES
    ACCESSORIES
    SOFTWARE
    LIGHTING
    BUNDLES
    Authorized Dealer - Full Warranty
    Earthquaker Devices Rainbow Machine V2 Polyphonic Pitch Shifting Modulator Pedal
    Polyphonic Pitch Shifter Pedal
    - Brand New -
    Description
    This one is for experimenters, adventurists, and noisemakers. Totally not for purists and/or tone hounds. There are no “natural sounds” that come from this box. It takes modern DSP and uses it as a tool of the future past to create real-time pitch shifting using digital oscillators.
    Controls
    The Rainbow Machine has been completely re-imagined from the pixie dust-covered ground up to be more versatile, twice as loud as the original, with an extended delay time, deeper chorus tones, silent flex switch footswitches on both the Activate (1) and Magic (2) functions, and most of all, more Magic.
    The Rainbow Machine is built around a DSP pitch-warping engine that’s designed to be slightly imperfect; colored with digital remnants of the cosmic dust we’ve picked up across the multiverse. That is to say, it’s a cold digital beast made to pretend it has feelings.
    The Pitch (3) control adjusts the frequency of the polyphonic pitch-warped harmony from a fourth below your input to a third above, and every atonal pitch in-between. Noon is the unison position. Pitch may also be controlled via the expression pedal. Use the Primary (4) function control to adjust the volume of the polyphonic harmony.
    Pro Tip:
    With the Pitch control set to noon, the Rainbow Machine acts as a chorus. Use the Primary control to adjust the wet signal volume and select the delay time with the Tracking control. The tracking improves as this control is increased, so turn it up for tighter tracking with a shorter delay time or turn it down for longer delays and more ambiance.]
    The Tracking (5) control adjusts the lag time between the wet and dry signals. Tone (6) rolls off some treble for a darker, “vintage” sound. Clockwise Tone settings are bright, counterclockwise is dark.
    The Secondary (7) control adds an octave of the Primary harmony. When the Pitch control is above noon, the Secondary adds an octave above the harmony. When the Pitch control is below noon, the Secondary control will add one octave below the harmony. With the Pitch set to noon, the Secondary control adds an additional chorus voice for modulated, triple-tracked tones. Use this control to blend in faux-shimmer sounds or a low-frequency rumble. It’s up to you. From there, it’s only a matter of how weird you wanna get.
    And you can choose how weird you get with the Magic (8) control. This is a regeneration control that creates aliasing (among other things) by feeding the Primary and Secondary signals back on themselves and each other, and a bunch of other stuff no one understands.
    With the Magic engaged and the control set low, you can squeeze a few extra repeats out of whatever setting you happen to be using. As you increase the Magic control, you’ll start noticing increased ambiance, resonant, edge-of-oscillation pitch-shifting delays, chorus, metallic Digi-flanging, ascending (or descending) pixie trails, controllable self-oscillation, squalls of synthetic noise, whale song, and finally, distortion. It’ll take you way beyond and open up your third eye, trust us. In conjunction with the Tracking control, the Magic creates wild pitch take-offs and descends, chaos chorusing, shrieks, groans, gurgles, wizard-blessed wizardry, signal transformation, imminent destruction, and other general mayhem.
    Maybe you only wanna get weird for a second? Okay, with the Rainbow Machine engaged, hold down the Magic footswitch, get weird, and then let go to return to your boring, old Magic-less guitar tone. Or, press the switch like normal, and the Magic remains engaged until you press the switch again. Ditto for the Activate switch. Press and hold to use the Rainbow Machine as a momentary effect, then let go to bypass; or feel free to press the switch like normal and use the Rainbow Machine like you would any other effects pedal.
    Pro Tip:
    The pitch warping behavior is entirely dependent upon the Pitch knob’s position relative to noon. Set above noon, echoes, pixie trails and other effects will ascend in pitch as they sustain. With the Pitch control below noon, any lingering effects will descend in pitch. This becomes extremely important when using the Magic function.]
    Suggested Settings
    Master Tape Chorus (with Momentary Magic Falling Stars)
    Phantasms
    Features/Specs
    Dimensions
    4.65 x 3.65 x 2.25 in. (118 x 93 x 57 mm) with knobs
    Current Draw
    68 mA
    Input Impedance
    1 MΩ
    Output Impedance
    <1 kΩ
    Flexi-Switch Technology
    This device features Flexi-Switch Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.
    For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.
    For momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.
    Since the switching is relay-based, it requires power to pass the signal.
    Power
    This device takes a standard 9-volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains, and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!
    We are authorized dealers for all these brands. Click a logo to see our listings.
    ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge.
    If an item is refused by the buyer, ship costs to and from the destination in which the item was shipped to are not refunded. Please note the cost of return shipping is usually double of what the original ship cost.
    Shipping is not free to HI, AK, and PR. FREE SHIPPING ONLY TO THE LOWER 48 STATES.
    We provide free shipping to the contiguous 48 United States, on most items.
    Shipping fees to ALL OTHER LOCATIONS will be calculated individually and added to customer invoices. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. In the event that the customer refuses a shipment, all shipping costs to and from the country or State in which the item was shipped to are not refunded. Please note, in some cases return shipping can cost as much as double the original ship cost.
    We operate a 30-day return period. Items must be returned with all original packaging as well as all included items. Items that are not returned in original, resalable condition are subject to a 15% restocking fee. We charge a 15% restocking fee on returned items only if the item is clearly used and or the packaging is tarnished. A 10% re-stock is more likely if the unit comes back in mint condition. The ship cost we paid to ship your item will be deducted as well. In some cases restock fees and ship costs can be applied as a store credit.
    We will exchange a defective unit for the same unit within the 30-day period. After that period, you will have to work directly with the manufacturer for warranty service.
    Items that can not be returned include: software, units with contents or packaging that is damaged/missing, and items that are considered for personal use (such as earphones, headphones, microphones, instrument mouthpieces, harmonicas or other items that you wouldn't want to purchase if someone else had previously used them). Also, Items which we do not normally stock (i.e. "Special Orders", discontinued products, close-outs, used products, etc.) are non-returnable. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order.
    Please contact us for a Return Authorization before returning any items.