-40%

Dr. Scientist The Elements *Free Shipping in the USA*

$ 105.07

Availability: 100 in stock
  • All returns accepted: Returns Accepted
  • Condition: New
  • Return shipping will be paid by: Buyer
  • Brand: Dr Scientist
  • Refund will be given as: Money Back
  • Type: Distortion
  • Item must be returned within: 30 Days
  • Model: The Elements

    Description

    From Dr. Scientist;
    Your guitar tone is like the elements of space after the big bang, floating through a vacuum in disharmony, their potential infinite but unrealized. Realize their potential and bring your tone into harmony with the Elements, a pedal that delivers overdrive, distortion and equalizer, and works with guitars, basses and electronic instruments. The Elements provides so much control over your tone, you'll think you're sitting at the control deck of a flying saucer, but its intuitive design means you won't need to check the manual every five minutes. Oriented toward high-gain tweakability, the Elements gives you the control you need while blasting a mean tone.
    Operation:
    Mono input, mono output
    Power Requirements: 9VDC @ 50mA, 18VDC @ 100mA
    Input/Output Impedance: 500kΩ/1kΩ
    Bypass: True bypass using soft touch switch and relay
    Knobs:
    Bass: +/-15dB peaking filter centred at 100Hz
    Midrange: +/-15dB peaking filter, centre frequency chosen by Mid Freq toggle
    Treble: +/-15dB peaking filter centred at 3kHzGain: Op-amp based, range from less than unity to very high saturation
    Vol:Passive resistance to ground
    Mix: Dry at 0, wet at full
    Switches: Gain: Lower position is low gain mode (less than unity to medium overdrive), Upper position is high gain mode (medium overdrive to heavy saturation
    Clip: Upper position is LED clipping diodes (2V threshold), Middle position is no clipping diodes, Lower position is asymmetrical clipping with Germanium diode and LED (.3V + 3V threshold)
    Bass: Upper position is medium input bass cut, Middle position is no input bass cut, Lower position is heavy input bass cut
    Mid Freq:Upper position sets midrange knob to 400Hz, Middle position is 1200Hz, Lower position is 800Hz
    Expression Control: Controls Mix knob, TRS input, 50kΩ