Black Basecoat Paint Gallon and Clearcoat Kit GM WA8555 HFP250 & 8000 HIGH TECK

Description

High Teck HFP-Series Gallon HFP250 Black Urethane Basecoat,
a Gallon of 8000 Clearcoat, and a Quart of 8010 Medium Hardener
HFP250 COMPARE TO: GM WA8555 EBONY BLACK
National rule product
This product CAN NOT be USED in California due to VOC Regulations
.
It is your responsibility to comply with VOC regulations
A quick dry, good hiding, factory pack basecoat
Ideal for overalls and large blend area repairs
A great ground coat for use under other basecoat colors
APPLICATION
Surface Prep
For Dry Sanding   Final sand with 500-600 Grit
For Wet Sanding   Final sand with 800-1000 Grit
Clean area with Wax and Grease Remover and wipe dry with a clean cloth
Tack Cloth any dust or dirt particles
Mixing
Normal           1 Part Color, 1 Part Urethane Reducer
Better Hide     2 Parts Color, 1 Part Urethane Reducer
<10%              Hardener(optional)
Spray Gun Set-Up
Gravity Feed             1.3-1.5mm         30 PSI at the gun inlet
Gravity Feed HVLP   1.3-1.5mm         10 PSI max at air cap
Coats
Apply 2-4 coats or until full coverage is achieved
Allow each coat to flash off 5 to 10 minutes between coats
Allow 20 minutes flash time after last color coat to apply clearcoat.