Bed Lifters Bed Risers Set Of Six - Douglas Fir Solid Core for 2.5 Furniture Leg

Description

Furniture Lifter / Bed Riser for Up To 2 1/2-Inch Wide Bed Post
SET OF SIX LIFTERS
These lifters are made at the time of your order -- made in our Oregon facility, so select the options that you want to build a set of lifters just right for you.  Steve's Gift Shoppe is a sole proprioetorship located in Oregon, USA.
These bed lifters are extremely strong, impossible to collapse. Construction is Douglas fir sold core with
a cedar exterior.
Lift Height (You Can Choose from 2-inch, 2 1/2-inch, 3-inch, or 4-Inch lift height)
Made in USA by Steve's Gift Shoppe
Universal design to fit several different bed styles.  Great for square or round bed posts and even casters.  Ideal for trundle beds.
Specifications
Inside clearance 2 3/4 (2.75) inches square
Outside width 3 3/4 inches
Overall height: 3 1/2 - 3 5/8 inches
Recessed area depth: 1/2 inch - 5/8 inch
Outside surfaces sanded and smoothed, corners rounded
Inner Core Material: Douglas fir solid core. Impossible to collapse.
Exterior Material: Cedar
Weight: Each bed lifter weighs about 1 pound (depends on lift height). A four-inch high lifter will weigh about two pounds each.  By comparison, a one-inch lift would weigh about 12 ounces.
Finish: Two coats of shellac for natural or stained lifters.  Painted lifters will have several coats of paint and do not need a clear shellac coat over the paint.
Color Options: Natural cedar, stained dark, or painted (you select color).  For paint option, message us after you order with the color that you want, or specify color during checkout.  We use Krylon or Rust-Oleum brand paint.   So, after you order, please visit the Krylon or Rust-Oleum website and pick out a color that suits your wishes.  It must be a color we can obtain from our local hardware / paint supplier.  Can we do color matching? No, we cannot promise to match color to your furniture.
FLOOR option - with or without felt bottom
LIFT HEIGHT OPTIONS: Please make your selection when you order
Caution: This product should be used with furniture legs that will fit within the recessed area and not create a ''tight'' fit.
Caution: Use only in the upright position and do not use outside edges of this product for lifting purposes.  Upright position is defined as recessed area is up, and flat surface of opposite side is to the floor.
Caution: If using this product on a wood floor or a laminate flooring, it is advised to affix a protective felt or rubber pad under the lifters to protect from any damage to the flooring.  SELECT FELT BOTTOM OPTION.
Shipping: Via Priority Mail
Production time is three days. Glue takes time to set and cure before doing the finishing work .
MEASURE -- PLEASE MEASURE your furniture legs to make sure these lifters are the correct size for your needs.