6ft Power Cord for Salton Hotray Food Warming Tray Model H-930 H-931 H-934 H-935

Description

This listing is for a New
"Replacement Power Cord"
This replacement power cord fits the
Salton Hotray
Food Warmer Tray
AKA: Hot Server, Hot Plate, Hotplate, Warming Tray
Model Number:
H-930, H-931, H-934, H-935
***Does not fit any CARTS!
*Please note that this type cord when new needs to be forced onto the prongs. The
female end of this cord has compression contacts. After the first use the cord will not
need as much force to install again. It is recommended that you leave the cord attached
to the appliance. You should only remove the cord for cleaning purposes.
(Cords for use in United States Power Outlets)
***You may need a power cord converter outside the U.S
If you have any questions please ask before you "Bid" or "Buy".
THANK YOU !
Bread Machine Parts Finder
***Important message about this type of power cord :
This type of power cord is intended to be attached to the appliance and
only removed from the appliance when absolutely necessary. Such as the purpose
of cleaning the appliance. You should otherwise always leave the cord attached to
the appliance and only unplug the cord from the electrical wall outlet.
If you repeatedly remove the cord from the appliance you will cause excessive wear
to the compression contacts in the female end of the cord. This will eventually cause
a loose connection. A loose connection will cause electrical shorting that will result in
the cord getting to hot or a short so severe that it will pop a breaker.
This rule applies to the power cord that was issued with your appliance when purchased
new as well as this cord that you may be purchasing soon. Many consumers don't know
this simple rule and will wear out cords, cause damage to their appliance, or pop breakers.
Following this simple rule will increase the life of the power cord as well as the life of the
appliance.